Skip to content

Talk to a real person

Verify parts fit & get recommendationsMon-Fri 9AM-6PM CST

In stock

Regular price $2,099.95
Sale price Regular price

Product Information

Front coilover set for the 2014-2020 Ford F-150 in 4WD, built for a truck running 4-6in. of lift. This is a FOX 2.5 Factory Series coilover with internal bypass and Dual Speed Compression adjustment, so it is a shock you tune to how you load and drive the truck, not one you bolt in and forget.

Why Upgrade to an Internal Bypass Coilover

Per FOX, here is what this coilover brings to the front of the truck:

  • Internal bypass lets oil flow around the piston at some points of the stroke and builds heavy pressure at others. In the seat that means the shock stays soft through the easy part of the travel and firms up hard where it needs to hold the truck up. The brand calls the result the feel of near-endless travel and support no other product matches.
  • The ride zone pairs a race-developed shock piston with that internal bypass and a Dual Speed Compression adjuster, so you can dial the shock in for the weight you carry, the terrain, and how fast you run it.
  • Aluminum bodies, cactus cooler reservoirs and 7/8in. shafts with redundant seals, hardware the brand says was proven in the harshest environments under the toughest conditions. [VERIFY: body diameter, the title says 2.5 and the product copy lists 3-inch and 2.5-inch bodies.]
  • Sized for the front of a 4WD F-150 running 4-6in. of lift, so the coilover matches the ride height you are building to rather than a stock-height truck.

Fitment Notes

Our fitment data covers the 2014-2020 Ford F-150, Base and Raptor, and the title specifies a 4WD truck and the front position. Our data lists no exclusions inside that range. If your truck is 2WD or falls outside 2014-2020, it is not covered by this listing, so check with us before you buy. [VERIFY: cab and bed configurations covered.]

More Coilovers that fit your F-150

Install and Honest Talk

The instructions in the box are your source for what comes off the truck, what tools or lift you need, and where the reservoirs mount, because the product copy does not say. Plan on tuning time too: the Dual Speed Compression adjuster is the point of the part, and it means the ride is only as good as the settings you land on. This is the front only, so plan how the rear gets to matching height. A 4-6in. lift also changes how the truck sits, gets in and out, and carries a load, and that is on you to live with once it is on.

What else you need: [VERIFY: supporting parts for a 4-6in. lift, hardware in the box, bolt and torque specs, tire and wheel clearance, reservoir mounting and clearance.]

Specs

  • Brand: FOX
  • Part number: 883-02-114
  • Part type: Coilovers
  • Quantity: [VERIFY: number of coilovers in the set]
  • Series: 2.5 Factory Series (per the title)
  • Position: Front (per the title)
  • Drivetrain: 4WD (per the title)
  • Lift: 4-6in. (per the title)
  • Body material: Aluminum
  • Shaft: 7/8in. with redundant seals
  • Reservoir: Cactus cooler reservoirs
  • Adjustment: Dual Speed Compression
Anything Coyote
Anything Coyote - Anything Coyote
Anything Coyote

No Robots. Just Car People.

Buying parts for your Mustang or F-150 should not feel like homework. Too many stores bury you in a giant catalog, slap the same distributor description on every product, and leave you guessing whether it even fits.


We do it the other way. We carry the brands you already trust, we tell you what a part actually does, and we give you the truth about the tradeoffs before you spend a dollar. Drone on that exhaust. Ride quality on those springs. Whether you need a tune. The stuff the big catalogs leave out.

Learn More